NoSome hardware monitoring chips are accessible through the ISA I/O ports.We have to write to arbitrary I/O ports to probe them. Do you want to scan for IPMIinterfaces? (YES/no): YESProbing for `IPMI BMC KCS' at 0xca0. If we don't find itthere, we have to read from arbitrary I/O ports to probe for suchinterfaces. NoSome systems (mainly servers) implement IPMI, a set of common interfacesthrough which system health data may be retrieved, amongst other things.We first try to get the information from SMBIOS. NoTrying family `VIA/Winbond/Nuvoton/Fintek'. YesFound `ITE IT8613E Super IO Sensors' Success! (address 0xa20, driver `to-be-written')Probing for Super-I/O at 0x4e/0x4fTrying family `National Semiconductor/ITE'. This is usually safe.Do you want to scan for Super I/O sensors? (YES/no): YESProbing for Super-I/O at 0x2e/0x2fTrying family `National Semiconductor/ITE'. We have to write tostandard I/O ports to probe them. NoSome Super I/O chips contain embedded sensors. Success! (driver `coretemp')Intel AMB FB-DIMM thermal sensor. NoAMD Family 12h and 14h thermal sensors. (YES/no): YESSilicon Integrated Systems SIS5595. It is generally safeand recommended to accept the default answers to all questions,unless you know what you're doing.Some south bridges, CPUs or memory controllers contain embedded sensors.Do you want to scan for them? This is totally safe. I've run sensors-detect from the console and this is what I sensors_detect-bash: sensors_detect: command not sensors-detect# sensors-detect version 3.6.0# System: retsamarret 000-F5221-FBA002-0001 # Board: retsamarret Default string# Kernel: 4.19.107-Unraid x86_64# Processor: Intel(R) Celeron(R) CPU J3355 2.00GHz (6/92/9)This program will help you determine which kernel modules you needto load to use lm_sensors most effectively. The fan noise is driving me up the wall now as the server is in my home office. You should now start the lm_sensors service to load the required Note: there is no driver for ITE IT8613E Super IO Sensors yet.ĭo you want to generate /etc/sysconfig/lm_sensors? (yes/NO): YESĬopy prog/init/lm_sensors.init to /etc/init.d/lm_sensors * Chip `Intel digital thermal sensor' (confidence: 9)Ĭhip `ITE IT8613E Super IO Sensors' (confidence: 9) Now follows a summary of the probes I have just done. Next adapter: SMBus I801 adapter at f040 (i2c-0)ĭo you want to scan it? (yes/NO/selectively): NO Reasonably well on most systems, it has been reported to cause troubleĭo you want to probe the I2C/SMBus adapters now? (YES/no): YES This is the most risky part, and while it works Lastly, we can probe the I2C/SMBus adapters for connected hardware ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): NO Yes, you do have ISA I/O ports even if you do not have any We have to write to arbitrary I/O ports to probe them. Some hardware monitoring chips are accessible through the ISA I/O ports. There, we have to read from arbitrary I/O ports to probe for such We first try to get the information from SMBIOS. Through which system health data may be retrieved, amongst other things. Some systems (mainly servers) implement IPMI, a set of common interfaces Noįound `ITE IT8613E Super IO Sensors' Success! Trying family `VIA/Winbond/Nuvoton/Fintek'. Trying family `National Semiconductor/ITE'. This is usually safe.ĭo you want to scan for Super I/O sensors? (YES/no): YES Some Super I/O chips contain embedded sensors. (YES/no): YESĪMD Family 12h and 14h thermal sensors. Some south bridges, CPUs or memory controllers contain embedded sensors.ĭo you want to scan for them? This is totally safe. It is generally safeĪnd recommended to accept the default answers to all questions, To load to use lm_sensors most effectively. This program will help you determine which kernel modules you need bash: sensors_detect: command not sensors-detect I've run sensors-detect from the console and this is what I sensors_detect In fan control is disabled and there is no fan controller detected. I've installed PERL, dynamix fan control and dynamic system temp. (other options in BIOS are "automatic" and "PWM manually"). Basically my fans have to be on all the time ("Full on" in bios" otherwise they are completely off regardless of temperatures. Hi all, I have a Terramaster F5-221 server running unraid, and I can't get fan control to work.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |